IntroductionProduct DescriptionDescriptionPowder coatingAnother NamePowder paint,Electrost
Email:services@moutainchem.com
| Description | Powder coating | |
| Another Name | Powder paint,Electrostatic powder coating, thermosetting powder coating | |
| Type | Epoxy polyester resin series | |
| Main Material | Epoxy resin,polyester resin, and hardner | |
| Advantage | Good adhesion,good mechanical property,strong coating film, | |
| excellent insulation,anticorrosion,energy-efficient,convenient operation. | ||
| Application Field | Apply to indoor use | |
| Household appliance:air conditioner indoor unit,fan,radiator, | ||
| kettle,lighting sets, refrigerator,TV set,kitchen ventilator, | ||
| disinfection cabinet,electric cooker,etc. | ||
| Daily use:Knife,fork,crafts,ornament,etc. | ||
| Indoor furniture:table,chair,cupboard, | ||
| safe,carved iron bed,door,curtain,etc. | ||
| Application Condition | Electrostatic spray/Triboelectric gun spray. | |
| Recommended curing condition:190℃/15min | ||
| (object surface temperature),range from 190 degree centigrade | ||
| for 20 minutes to 210 degree centigrade for 8minutes. | ||
| Recommended film thickness:50~80um, range from 40~150um | ||
| Physical Property | Specific gravity | 1.4~1.8g/cm3 as per formula and color |
| Particle size | average 35~40um | |
| Test Condition | Substrate | 0.5mm thickness cold rolled steel sheet |
| Pretreatment | Remove rust and grease | |
| Film thickness | 50~80um | |
| Curing temperature | 190℃/15min | |
| Mechanical Property | Pencil hardness | ISO 15184-1998:Null |
| Adhesion (by griding) | GB/T 9286-1998:≤2 grade | |
| Impact test | GB/T 1732-1993:≥25 kg.cm | |
| Bending test | GB/T 6742 :≤4mm | |
| Cupping test | GB/T 9753:Null | |
| Chemical and Durability Test | Salt spray test | GB/T 1771.≥500 hours,no obvious change , |
| crossion width at cross≤2mm | ||
| Humidity test | GB/T 1740.≥500 hours,no change | |
| Package | Inside by PE bag,outside by carton,net weight 25kg/carton | |
| Storage Condition | Store in dry ventilated room,temperature under 35 degree centigrade, | |
| avoid direct sunlight. | ||
| Shelf Life | Six months | |
| Health and Safty | Raw material of powder coating don’t contain toxic substance, | |
| no toxic gas produced during curing.Please wear dust mask in operation | ||
| to avoid inhelation of powder.Please avoide prolonged skin contact | ||
| with powder,wash out powder with soap and water. | ||
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
