IntroductionComposition: Fluorinated surfactant solutionAppearance: light yellow viscous liquid
Email:services@moutainchem.com
Composition: Fluorinated surfactant solution
Appearance: light yellow viscous liquid
Active ingredient: 18%
Solvent: water/alcohol mixtureApplication range:
Suitable for aqueous systems
| Category | Specifications |
|---|---|
| Product Name | STD-2461 Fluorinated Surfactant Solution |
| Chemical Type | Perfluoroalkyl ether carboxylate |
| Appearance | Clear, colorless to pale yellow liquid |
| Active Content | 30±2% in aqueous solution |
| pH Value | 7.0-9.0 (as supplied) |
| Density (25°C) | 1.10-1.20 g/cm³ |
| Viscosity (25°C) | 10-50 mPa·s |
| Surface Tension | ≤18 mN/m (0.1% aqueous solution) |
| Property | Description |
|---|---|
| Ultra-Low ST | Dramatically reduces surface tension (≤18 mN/m) |
| Thermal Stability | Stable up to 200°C |
| Chemical Resistance | Resistant to acids, bases, and solvents |
| Compatibility | Works in waterborne and solvent systems |
| Foam Control | Low foam generation |
| Industry | Use Case |
|---|---|
| Coatings | Improves wetting on low-energy surfaces |
| Electronics | Enhances coating uniformity in PCB manufacturing |
| Textiles | Provides water/oil repellency |
| Firefighting Foams | Forms stable aqueous film-forming foam (AFFF) |
| Cleaning Agents | Boosts surface contact in specialty cleaners |
| Advantage | Benefit |
|---|---|
| Superior Wetting | Enables coating of difficult substrates |
| Chemical Resistance | Maintains performance in harsh environments |
| Low VOC | Environmentally preferable formulation |
| Dilution Stability | Remains effective at <0.1% concentration |
| Regulatory Compliance | Meets PFAS restrictions (C6 chemistry) |
| Parameter | Recommendation |
|---|---|
| Typical Dosage | 0.01-0.5% of total formulation |
| Addition Point | Early in formulation process |
| Mixing | Gentle agitation sufficient |
| Storage | 5-30°C; avoid freezing |
| Shelf Life | 24 months unopened |
| Aspect | Details |
|---|---|
| Toxicity | LD50 >2000 mg/kg (oral, rat) |
| Biodegradability | Not readily biodegradable |
| Regulatory Status | EPA approved, REACH registered |
| PPE Requirements | Gloves and safety glasses recommended |
| Feature | STD-2461 | Hydrocarbon Surfactants |
|---|---|---|
| Surface Tension | ≤18 mN/m | ≥25 mN/m |
| Chemical Resistance | Excellent | Moderate |
| Dosage Efficiency | 10x more potent | Standard |
| Environmental Profile | C6 chemistry | Conventional chemistry |
References
Manufacturer Technical Bulletin (2024)
Journal of Fluorine Chemistry (2023)
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
