IntroductionComposition: Modified acrylate copolymer solutionAppearance: light yellow transpare
Email:services@moutainchem.com
Composition: Modified acrylate copolymer solution
Appearance: light yellow transparent solution
Active ingredient: 50%
Solvent: Dipropylene glycol monomethyl ether/mixed aromatics
Applications:
Solvent-borne and solvent-free coatings and ink systems such as alkyd, acrylic, amino baking enamel, polyurethane, and light-curing.
| Category | Specifications |
|---|---|
| Product Name | Leveling Agent STD-1392 |
| Chemical Composition | Modified polysiloxane polyether copolymer |
| Appearance | Clear pale yellow liquid |
| Active Content | 100% |
| Density (25°C) | 1.01-1.03 g/cm³ |
| Viscosity (25°C) | 50-150 mPa·s |
| Flash Point | >100°C |
| Solubility | Soluble in most organic solvents, dispersible in water |
| Key Performance | Characteristics |
|---|---|
| Surface Tension | 22-24 mN/m (0.1% in water) |
| Compatibility | Waterborne, solvent-borne, UV-curable systems |
| Thermal Stability | Stable up to 200°C |
| Defect Control | Eliminates craters, pinholes, orange peel |
| Foam Characteristics | Low foam generation |
| Applications | Recommended Use |
|---|---|
| Automotive Coatings | High-gloss topcoats and clearcoats |
| Industrial Coatings | Machinery and appliance finishes |
| Wood Coatings | Furniture and flooring applications |
| Plastic Coatings | Improves adhesion on PP/PE substrates |
| UV-Curable Systems | Electronic and optical coatings |
| Performance Advantages | Benefits |
|---|---|
| Superior Flow | Eliminates surface defects effectively |
| Substrate Wetting | Excellent on low-energy surfaces |
| Gloss Enhancement | Increases DOI (Distinctness of Image) by 15-20% |
| Dosage Efficiency | Effective at 0.1-0.5% (based on total formulation) |
| Recoatability | No intercoat adhesion issues |
| Usage Guidelines | Recommendations |
|---|---|
| Optimal Dosage | 0.2-0.4% of total formulation weight |
| Addition Point | Final adjustment phase |
| Mixing | Moderate agitation (300-500 rpm) sufficient |
| Storage Conditions | Keep tightly sealed at 5-30°C |
| Shelf Life | 24 months in original packaging |
| Safety & Compliance | Standards |
|---|---|
| Toxicity | LD50 >2000 mg/kg (oral, rat) |
| Skin Irritation | Mild (Category 3) |
| Regulatory Status | REACH registered, FDA 21 CFR 175.300 compliant |
| VOC Content | <50 g/L |
| PPE Requirements | Safety glasses and nitrile gloves recommended |
| Technical Comparison | STD-1392 | Conventional Leveling Agents |
|---|---|---|
| Surface Tension | 22-24 mN/m | 28-32 mN/m |
| Defect Elimination | Excellent | Good |
| Thermal Stability | Up to 200°C | Up to 150°C |
| Foam Tendency | Very Low | Moderate |
| Cost Performance | 30% more efficient | Standard |
References:
Product Technical Bulletin (2024)
Journal of Coatings Technology and Research (2023)
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
