IntroductionComposition: water-soluble polymers containing hydrophobic groupsAppearance: light
Email:services@moutainchem.com
Composition: water-soluble polymers containing hydrophobic groups
Appearance: light yellow slightly turbid viscous liquid
Active ingredient: 18%
Solvent: water
Application range:
Suitable for all types of water coating systems
| Category | Specifications |
|---|---|
| Product Name | Rheology Modifier STD-9048 |
| Chemical Type | Hydrophobically modified alkali-swellable emulsion (HASE) |
| Appearance | Milky white liquid |
| Active Content | 30±1% |
| pH Value | 2.5-4.0 (as supplied) |
| Viscosity (25°C) | <100 mPa·s (neat) |
| Density (25°C) | 1.05 g/cm³ |
| Solubility | Water-thickenable |
| Key Performance | Characteristics |
|---|---|
| Rheology Profile | Strong pseudoplastic behavior |
| pH Activation | Activates at pH >6.5 |
| Shear Recovery | >90% recovery within 60 sec |
| Compatibility | Excellent in latex systems |
| Syneresis Control | Prevents water separation |
| Applications | Recommended Use |
|---|---|
| Architectural Coatings | Interior/exterior paints |
| Textile Coatings | Print paste thickener |
| Adhesives | PSA formulations |
| Paper Coatings | Improves runnability |
| Ceramic Glazes | Controls suspension |
| Performance Advantages | Benefits |
|---|---|
| High Efficiency | 0.2-0.8% dosage sufficient |
| Spatter Resistance | Excellent roll/brush application |
| Color Acceptance | No negative impact on tint strength |
| Freeze-Thaw Stability | 5 cycles without performance loss |
| Low VOC | <5 g/L |
| Usage Guidelines | Recommendations |
|---|---|
| Activation Method | Neutralize to pH 7.5-9.5 with ammonia/amine |
| Addition Point | Post-dispersion at 25-50°C |
| Mixing | Moderate agitation (400-800 rpm) |
| Storage Conditions | 5-35°C, avoid freezing |
| Shelf Life | 12 months |
| Safety & Compliance | Standards |
|---|---|
| Flash Point | None (aqueous) |
| GHS Classification | Not hazardous |
| Regulatory Status | REACH compliant |
| Biodegradability | >60% in 28 days |
| PPE Requirements | Safety glasses recommended |
| Technical Comparison | STD-9048 | Cellulose-based |
|---|---|---|
| Viscosity Build | Faster activation | Slower hydration |
| Spatter Resistance | Excellent | Poor |
| pH Stability | Stable in pH 4-10 | Limited stability |
| Microbial Resistance | Inherent | Requires biocides |
| Cost Efficiency | 40% dosage reduction | Standard |
References:
Product Technical Data Sheet (2024)
Progress in Organic Coatings (2023)
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
