Non Modified Cellulose Ether

IntroductionNon-modified cellulose ether is a natural polymer derived from plant cellulose, wid

Content

Introduction

Non-modified cellulose ether is a natural polymer derived from plant cellulose, widely used in industries for its thickening, stabilizing, and water-retention properties. Unlike chemically modified cellulose ethers, it retains its natural structure, making it biodegradable and environmentally friendly. This article presents key data on its characteristics and uses through structured tables.

1. Fundamental Properties of Non-Modified Cellulose Ether

Table 1: Basic Physicochemical Properties

Property	Typical Value	Measurement Method
Molecular Weight	50.000-2.000.000 Da	Gel Permeation Chromatography
Degree of Polymerization	200-10.000	Viscosimetry
Solubility in Water	Insoluble to partially soluble	Hot/cold water test
pH Stability Range	5.0-9.0	pH titration
Decomposition Temperature	260-300°C	Thermogravimetric Analysis

2. Functional Performance Comparison

Table 2: Performance in Aqueous Systems

Parameter	Non-Modified Cellulose Ether	Modified Cellulose Ether
Water Retention	Moderate (60-80%)	High (80-95%)
Viscosity Development	Slow hydration	Rapid hydration
Salt Tolerance	Low	Medium-High
Thermal Stability	Stable up to 60°C	Stable up to 90°C
Film Formation	Brittle	Flexible

3. Industrial Applications

Table 3: Sector-Specific Uses

Industry	Primary Function	Typical Concentration	Key Benefit
Food	Thickener, Stabilizer	0.1-1.0%	Clean label compliance
Pharmaceuticals	Tablet binder, Disintegrant	2-5%	Non-reactive excipient
Construction	Mortar water retention	0.2-0.5%	Reduced cracking
Cosmetics	Viscosity modifier	0.5-2.0%	Natural alternative
Paper Manufacturing	Strength additive	0.3-1.5%	Improved fiber bonding

4. Technical Specifications by Grade

Table 4: Commercial Grade Variations

Grade	Particle Size (µm)	Moisture Content	Ash Content	Recommended Use Case
Food Grade	50-150	≤8%	≤0.5%	Dairy products, sauces
Pharma Grade	20-80	≤5%	≤0.3%	Tablet formulations
Industrial	100-300	≤10%	≤1.0%	Adhesives, mortars
Cosmetic	30-100	≤6%	≤0.4%	Lotions, creams

Key Advantages

Sustainability: 100% biodegradable with minimal environmental impact

Regulatory Status: Generally Recognized As Safe (GRAS) for food applications

Process Compatibility: Works in both hot and cold processing systems

Limitations

Lower viscosity compared to modified variants

Limited solubility in organic solvents

Reduced performance in high-salt environments

Conclusion

Non-modified cellulose ether offers a natural, eco-friendly solution for multiple industrial applications where chemical modification is undesirable. While possessing some performance limitations versus modified versions, its environmental profile and regulatory acceptance make it valuable for sustainable product development.

Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.

prev： Diethylene Glycol Monobutyl Ether Acetate CAS 124-17-4

next： Acrylic polyol resin MT-7152-80