High quality Chemical Manufacturer
National consultation hotline: +86 021-64208466
Current location: Home > Products > Chemicals > Other Chemicals >

N-(2-Hydroxyethyl)piperazine CAS 103-76-4

N-(2-Hydroxyethyl)piperazine - Names and IdentifiersNameN-(2-Hydroxyethyl)piperazineSynonymsNSC

Email: info@standard-groups.com

Content

N-(2-Hydroxyethyl)piperazine - Names and Identifiers

NameN-(2-Hydroxyethyl)piperazine
SynonymsNSC 38969
NSC 26884
NSC 60706
1-Piperazineethanol
N-(2-Hydroxyethyl)pi
Piperazineethanol, 1-
Hydroxyethyl piperazine
2-piperazin-1-ylethanol
2-(1-Piperazino)ethanol
1-piperazin-1-ylethanol
1-(2-Hydroxyethyl)piperazine
N-(2-Hydroxyethyl)piperazine
N-(2-Hydroxyethyl) piperazine
1-(2-hydroxyethyl)piperazinediium
(2E)-3-(naphthalen-2-yl)prop-2-enoic acid
2-(Piperazin-1-yl)ethan-1-ol, 1-Hydroxy-2-(piperazin-1-yl)ethane
1-(2-Hydroxyethyl)piperazine,2-Piperazinoethanol, Piperazine-1-ethanol
CAS103-76-4
EINECS203-142-3
InChIInChI=1/C6H14N2O/c1-6(9)8-4-2-7-3-5-8/h6-7,9H,2-5H2,1H3

N-(2-Hydroxyethyl)piperazine - Physico-chemical Properties

Molecular FormulaC6H14N2O
Molar Mass130.19
Density1.061g/mLat 25°C(lit.)
Melting Point-38.5 °C
Boling Point246°C(lit.)
Flash Point>230°F
Water SolubilityMISCIBLE
SolubilityChloroform (Slightly), Methanol (Slightly)
Vapor Presure0.007 hPa (20 °C)
AppearanceTransparent, bright yellow liquid
Specific Gravity1.060
ColorClear colorless to pale yellow
BRN104361
pKa14.96±0.10(Predicted)
PH12.3 (100g/l, H2O, 20℃)
Storage ConditionStore below +30°C.
Explosive Limit1.4-8.9%(V)
Refractive Indexn20/D 1.506(lit.)
MDLMFCD00005970
Physical and Chemical PropertiesThe boiling point of 246 deg C, the relative density of 1.061, refractive index of 1.5065.
UseIt is an important intermediate for the production of triethylenediamine, surfactants, pharmaceuticals and pesticides, and can be used to synthesize fluphenazine, a psychiatric drug, etc.

N-(2-Hydroxyethyl)piperazine - Risk and Safety

Hazard SymbolsXi - Irritant

Risk CodesR36/37/38 - Irritating to eyes, respiratory system and skin.
R41 - Risk of serious damage to eyes
R38 - Irritating to the skin
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/39 -
S37/39 - Wear suitable gloves and eye/face protection
WGK Germany1
RTECSTL6825000
TSCAYes
HS Code29335995
Hazard NoteIrritant
ToxicityLD50 orally in Rabbit: 4000 mg/kg LD50 dermal Rabbit > 5000 mg/kg

N-(2-Hydroxyethyl)piperazine - Reference Information

LogP-1.47 at 25℃
NIST chemical information Information provided by: webbook.nist.gov (external link)
EPA chemical information Information provided by: ofmpub.epa.gov (external link)
use is an important intermediate in the production of triethylenediamine, surfactant, medicine and pesticide. it can be used in the synthesis of psychotic fluphenazine, etc.
it is used in organic synthesis and is an important intermediate in the production of triethylenediamine, surfactant, medicine and pesticide. It can also be used to synthesize psychotic fluphenazine, etc.
Production method It is obtained by the reaction of piperazine hexahydrate and ethylene oxide. Dissolve piperazine hexahydrate in water, stir and cool to 15-20°C, and pass in ethylene oxide. After the passage is completed, the reaction is stirred at 30-35 ℃ for 2 hours, and the 90% of the original water added amount is steamed by heating. Cold to below 15 ℃, filter. The filtrate was distilled under reduced pressure, and the fraction at 145-155 ℃(5.33kPa) was collected to obtain N-(2-hydroxyethyl) piperazine.
spontaneous combustion temperature 280°C

Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.


Online Message

Contact Details

Company Phone

+86-21-6420 0566

Working hours

Monday to Friday

Mobile phone:

13816217984

Email:

info@qinsun-lab.com

QR code