Product Name4-(2-Benzothiazolyldithio)MorpholineMultiple Names2-(Morpholinodithio)Benzothiazole;2-(4
Email: info@standard-groups.com
It is mainly used in the manufacture of tyres, rubber shoes, sponges, industrial products, etc. It is also used as a backhoe vulcanizing accelerator for rubber and as a vulcanizing agent. When used as accelerator, its performance in natural rubber is similar to that of accelerator CZ, but its delay is slightly greater. Advantage of 4-(2-Benzothiazolyldithio)Morpholine CAS No. 95-32-9 The product is easy to disperse in rubber and has almost no pollution. The physical properties of products in process are excellent. Easy storage and stable performance.
| Name | 2-(morpholinodithio)benzothiazole |
| Synonyms | accelds Accelerator MDB 2-morpholinodithiobenzothiazole 2-(morpholinodithio)-benzothiazol 2-(morpholinodithio)benzothiazole 4-(2-Benzothiazoldithio)morpholine 2-benzothiazolylmorpholinodisulfide 2-(4-Morpholinodithio)-benzothiazole 2-(4-morpholinyldithio)benzothiazole 2-(4-morpholinyldithio)-benzothiazol 4-morpholinyl2-benzothiazyldisulfide 4-(2-BENZOTHIAZOLYLDITHIO)MORPHOLINE 2-(4'-Morpholinodithio) benzothiazole 2-[(3-methoxyphenyl)ethynyl]-6-methylpyridine 2-(morpholin-4-yldisulfanyl)-1,3-benzothiazole |
| CAS | 95-32-9 |
| EINECS | 202-410-7 |
| InChI | InChI=1/C15H13NO/c1-12-5-3-7-14(16-12)10-9-13-6-4-8-15(11-13)17-2/h3-8,11H,1-2H3 |
| Molecular Formula | C11H12N2OS3 |
| Molar Mass | 284.42 |
| Density | 1.3762 (rough estimate) |
| Melting Point | 130 °C |
| Boling Point | 455.0±55.0 °C(Predicted) |
| Flash Point | 138.5°C |
| Vapor Presure | 1.16E-05mmHg at 25°C |
| Appearance | Morphological Solid |
| pKa | -0.46±0.10(Predicted) |
| Storage Condition | 2-8℃ |
| Refractive Index | 1.5650 (estimate) |
| MDL | MFCD00059033 |
| Physical and Chemical Properties | Chemical industrial products are light yellow powder. Relative density 1.51, melting point 123-135 ℃. Soluble in chloroform, slightly soluble in carbon disulfide, acetone, insoluble in benzene, petroleum ether, ethanol and water. |
| Use | Use The rear shovel vulcanization accelerator of rubber can also be used as a vulcanizing agent. When used as an accelerator, the performance in natural rubber is similar to that of accelerator CZ, but the delay is slightly larger. When used in 54-1(W) neoprene, with accelerator PZ, can speed up the curing speed, scorch performance is also good, the physical properties of the product is excellent. When used in styrene-butadiene rubber, the scorching performance is poor, and stearic acid can be used to promote drought scorching and improve the constant elongation strength. When used as a vulcanizing agent, it is advisable to add a small amount of thiuram or dithiocarbamate to promote drought to improve the rate of thiogeneration, and the aging resistance of the product can also be improved. The product is easily dispersed in rubber and is almost non-polluting. Mainly used in the manufacture of tires, rubber shoes, sponges, industrial products, etc. When used as a vulcanizing agent, the dosage is 2.5-5 parts, and about 1 point of accelerator PZ is added. When used as an accelerator, the general dosage is 0.4-1.5 parts. |
Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
Company Phone
+86-21-6420 0566
Working hours
Monday to Friday
Mobile phone:
13816217984
Email:
info@qinsun-lab.com
